Home » Products » CO2 Recovery Plant » CO2 Generator from Carbon-Contained Fuel
inquiry form

CO2 Generator from Carbon-Contained Fuel

Introduction
Some customers may only need CO2 in small amount, but it is expensive and hard to get from the local market. Meanwhile, on the market, the fuel is rich and cheap. Then our CO2 generator from carbon-contained fuel must be your best choice. It may serve either as an industrial carbon dioxide generator or food-grade LCO2 recovery plant.

For this device, the CO2 gas comes from the combustion of carbon fuels, such as coal, LNG, diesel and petrol. The gas got through this way is clean, pure, and easy to handle. Then the gas is refined by MEA adsorption and desorption, as well as cryogenic distillation techniques. We also have treatment of extracting LCO2. The whole progress consists of five steps: combustion, purification, compression, refrigeration and storage.

Advantages
The CO2 generator from carbon source has the following features:
1. skid-mounted design, small space occupation, convenient shipping and installation;
2. advanced detection and control systems to ensure normal, stable, secure, and reliable running of the device;
3. applicable fuel: LPG, LNG, gasoline, diesel oil and other carbon fuels
4. output: 30-500 kg/h
5. purity: customizable, the maximum can reach food grade

Purchasing Guide
If you want to buy our CO2 generator from carbon-contained fuel, please advise about the following information, and we will offer supports accordingly:
1. quality (industrial or food grade) and quantity (measured in kg/hr) requirements
2. raw material (such as natural gas, oil, coal or others)
3. basic conditions of project sites (such as altitude, barometric pressure, ambient temperature, extreme temperatures, earthquake intensity, maximum wind speed, etc)
4. public engineering conditions (such as power supplies, motor starting requirement, whether there is a supply of cooling water)

Technical Parameters
Main features 100kg/h food-grade LCO2 recovery plant from fuel oil combustion
Recovery capability 2400kg/d, 100kg/h LCO2
LCO2 Characters cryogenic liquid CO2, pressure: 1.8-2.0MPa , temperature: -18 ℃ to -25 ℃
LCO2 quality standards International Society of Beverage Technologists (ISBT) standards
Gas source diesel combustion
Water consumption primary water: 300kg/h; cooling water:60m3 /h
Power consumption installed power: 100kw (400V), device with the largest power consumption: 30kw
Oil consumption 35kg/h
Device Structure and Schematic Flow Diagram of Production
Inquiry Form